[Elecraft] Elecraft at mailman.qth.net

[Don Wilhelm]

Tom,

Have you centered the CW signal in the CWT bargraph?  That is necessary 
- use auto-spot for an easy way to tune the signal to center.
You could try narrowing the filter width to isolate that one signal.

73,
Don W3FPR

On 7/17/2017 11:38 AM, Tom Parish wrote:

> 
> Problem: I'm not seeing any CW decoding anymore except when I manually
> touch the paddles.
> 
> I can hear CW signals coming in strong but no decoding seems to be occuring
> for them.
> 
> Settings:
> MODE: CW
> FILTER: .45
> CWT:  on
> Logging: On
> Green LED is showing
> RX Thr - I've tried from THR1-THR4 - no change
> The "T" is showing in the lower right hand corner