[Elecraft] Transverters on the K2, IF Frequencies, No 10 Mhz Option?

[Harry Yingst]

I am unable to select 10 Mhz for an IF for transverter use only selections are 7,14,21, or 28

10 Mhz is enabled (can you disable a band on the K2) and works as a regular band.






      From: Don Wilhelm <donwilh at embarqmail.com>
 To: Harry Yingst <hlyingst at yahoo.com>; Elecraft Reflector <elecraft at mailman.qth.net> 
 Sent: Tuesday, February 28, 2017 8:37 PM
 Subject: Re: [Elecraft] Transverters on the K2, IF Frequencies, No 10 Mhz Option?
   
Harry,

Do you have 10MHz mapped out for the band selection process?

73,
Don W3FPR

On 2/28/2017 6:16 PM, Harry Yingst via Elecraft wrote:
>
> As per the K60XV Assembly and Operating Instructions Page 18  "The IF field can be set to 7, 10, 14, 21, or 28 MHz."
> When I go to set the IF the options are only 7, 14, 21, or 28 MHz.  The 10 MHz option is not available.
>
> I'm running the latest firmware v1.09 on the K2 and v1.02 on the K60XV  (or so I would believe it to be as this is a new K2).
>