[Elecraft] Transverters on the K2, IF Frequencies, No 10 Mhz Option?

[Don Wilhelm]

Harry,

Do you have 10MHz mapped out for the band selection process?

73,
Don W3FPR

On 2/28/2017 6:16 PM, Harry Yingst via Elecraft wrote:
>
> As per the K60XV Assembly and Operating Instructions Page 18  "The IF field can be set to 7, 10, 14, 21, or 28 MHz."
> When I go to set the IF the options are only 7, 14, 21, or 28 MHz.  The 10 MHz option is not available.
>
> I'm running the latest firmware v1.09 on the K2 and v1.02 on the K60XV   (or so I would believe it to be as this is a new K2).
>