[Elecraft] K3 Memory Question

[Charlie T, K3ICH]

I think he might be referring to the Canadian time station CHU on 7850 kHz.
Charlie k3ICH


-----Original Message-----
From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Don
Wilhelm
Sent: Tuesday, February 21, 2017 11:25 AM
To: Ron Manfredi <wa2eio at optonline.net>; elecraft at mailman.qth.net
Subject: Re: [Elecraft] K3 Memory Question

What "40 meter WWV frequency" - WWV transmits on 5, 10, 15 and 20MHz.
If you want to set a memory to 10MHz WWV, you should select 30 meters, tune
to 10.000.00 and set the memory from there.

73,
W3FPR

On 2/21/2017 9:58 AM, Ron Manfredi wrote:
>
> I am trying to get my head around the memory set-up on the K3. Must be 
> missing something.
> I have set memories (and config) 0-9 as band switches, and that seems 
> to be OK; the last frequency I used on each band is stored in memory 
> when I go back there, but I put the 40 meter WWV frequency into memory 
> 11, and now my 40 meter memory (#1)  shows that frequency when I 
> select it.  How can I save a specific frequency in memory, without having
it change ?
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html Message delivered to 
> donwilh at embarqmail.com
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to pincon at erols.com