[Elecraft] K3 Memory Question

[Ron Manfredi]

Ramon, Thanks for the advice.  That is probably what my difficulty is; I 
will check when I get back to the rig tonight.

Don, I realized after I sent the message that I meant CHU, (not WWV) but 
did not want to  make another post just for the correction.   The basic 
memory question was valid though, no matter what frequency I was talking 
about.


On 2/21/2017 11:24 AM, Don Wilhelm wrote:
> What "40 meter WWV frequency" - WWV transmits on 5, 10, 15 and 20MHz.
> If you want to set a memory to 10MHz WWV, you should select 30 meters, 
> tune to 10.000.00 and set the memory from there.
>
> 73,
> W3FPR
>
> On 2/21/2017 9:58 AM, Ron Manfredi wrote:
>>
>> I am trying to get my head around the memory set-up on the K3. Must be
>> missing something.
>> I have set memories (and config) 0-9 as band switches, and that seems to
>> be OK; the last frequency I used on each band is stored in memory when I
>> go back there, but I put the 40 meter WWV frequency into memory 11, and
>> now my 40 meter memory (#1)  shows that frequency when I select it.  How
>> can I save a specific frequency in memory, without having it change ?
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to donwilh at embarqmail.com
>>
>