[Elecraft] KX3/KXPA and Ameritron ALS-1306

David Gow 6146guy at gmail.com
Sun Feb 19 12:20:57 EST 2017


Thanks Joe.  I used a common TRS audio cable, cut off one end and spliced
the proper wires and ground to the appropriate wires on the cut off end of
an old strait  through DB9 cable and it all works perfectly connected to
the ALS-1306 Kenwood cable.  The hardest part was using a DMM to identify
the wires/pins on the DB9 cable since they had atypical color coding.

73 Dave W7VM

On Tue, Feb 14, 2017 at 3:07 PM, Joe Subich, W4TV <lists at subich.com> wrote:

>
> Look at the Kenwood cable and pay attention to the TxD/RxD/Ground
> lines.  Match them up to the TxD/RxD (unused)/Gnd lines on the
> KXPA PC interface.
>
> 73,
>
>    ... Joe, W4TV
>
>
>
> On 2/14/2017 5:22 PM, David Gow wrote:
>
>> Ameritron does not make a band switching cable for this combination.  Does
>> anyone have information for me to make or modify a cable?  The combination
>> works great but I sure miss the automatic amplifier band switching.  I
>> have
>> the KX3 and the KXPA100 (using the KXPA100 utility command tester) both
>> set
>> at 9600 baud because the ALS-1306 only accepts 9600 baud but I don’t
>> understand serial cables very well and the ALS-1306 does not use a
>> standard
>> straight through cable or a null modem cable either.  It uses custom
>> proprietary cables for different radios.
>>
>>
>> Dave
>>
>> W7VM
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to lists at subich.com
>>
>> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to 6146guy at gmail.com


More information about the Elecraft mailing list