[Elecraft] KX3/KXPA and Ameritron ALS-1306

[Joe Subich, W4TV]

Look at the Kenwood cable and pay attention to the TxD/RxD/Ground
lines.  Match them up to the TxD/RxD (unused)/Gnd lines on the
KXPA PC interface.

73,

    ... Joe, W4TV


On 2/14/2017 5:22 PM, David Gow wrote:
> Ameritron does not make a band switching cable for this combination.  Does
> anyone have information for me to make or modify a cable?  The combination
> works great but I sure miss the automatic amplifier band switching.  I have
> the KX3 and the KXPA100 (using the KXPA100 utility command tester) both set
> at 9600 baud because the ALS-1306 only accepts 9600 baud but I don’t
> understand serial cables very well and the ALS-1306 does not use a standard
> straight through cable or a null modem cable either.  It uses custom
> proprietary cables for different radios.
>
>
> Dave
>
> W7VM
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to lists at subich.com
>