[Elecraft] KFL3C-200 Filter

[Stuart]

Hi Don,
      I removed the 200Hz filter this morning, and as you said, the offset
was on the paper tag. I set up the -0.87 offset via the K3 utility, and now
all is well.

Thank you for your help, much appreciated.

73, Stuart GD0OUD.         

-----Original Message-----
From: Don Wilhelm [mailto:donwilh at embarqmail.com] 
Sent: 09 February 2017 23:12
To: Stuart; elecraft at mailman.qth.net
Subject: Re: [Elecraft] KFL3C-200 Filter

Stuart,

Look on the filter itself.  The offset should be marked on the paper tag 
affixed to the filter.
I don't know about the new 6 pole filter, but that is true for the 5 
pole filters, and I assume it is the same for that one.

In other words, the offset is not on separate paperwork.

73,
Don W3FPR

On 2/9/2017 4:52 PM, Stuart wrote:
> I have fitted the KFL3C-200 Filter to my K3. There was no paperwork with
the
> filter, to give a frequency offset, if any.