[Elecraft] P3 drift

[Don Wilhelm]

Vic,

Remember that the P3 IF is tunable from 455kHz to 21MHz.
That means you can tune the P3 to the RWM signal.  You will not hear 
anything, but you should see the signal on the display and can see how 
much it moves.

73,
Don W3FPR

On 12/9/2017 11:51 PM, Victor Rosenthal 4X6GP wrote:
> I think that if it were the K3, then I would hear a change in the pitch 
> of a signal over the first few minutes, and I haven't noticed that.
> I think I'm going to do a more careful test: tune to RWM (the Russian 
> version of WWV, which is good and loud here) and see what the change is 
> on the K3 and the P3 in the first 15 minutes from a cold start.