[Elecraft] K3 slightly off frequency

[John Dolan]

Also, Check to see that you are not on COARSE tuning.  In SSB mode, you can
easily be off frequency when the COARSE setting is chosen.  I have
experienced this recently and when I turned off coarse, I was able to tune
the rig onto frequency.   It seems that COARSE  had me in the "ball park"
but not quite on the correct frequency. The more I am using my k3S, the
more I am finding out about these things.

73, John WB4YAL

*Many of life's problems can be solved by simply deciding what we can do
without. -JohnDolan  <https://www.qrz.com/db/WB4YAL>*

On Sun, Apr 9, 2017 at 6:02 PM, Don Wilhelm <donwilh at embarqmail.com> wrote:

> For all those having some similar occurrance - first make sure RIT and XIT
> are turned off.  The yellow LED in the lower left corner of the K3 should
> be off for both transmit and receive.
>
> 73,
> Don W3FPR
>
> On 4/9/2017 5:42 PM, Dick via Elecraft wrote:
>
>> I have a K3 kit that's been back to the factory for repair and alignment,
>> and a K3S that was factory made and aligned.  Regardless which  one I'm
>> using, most of the time when I get "spotted" by RBN, my  frequency is
>> listed as
>> being 100hz higher than listed on the  K3's front panel digital readout.
>>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to johndolan55 at gmail.com
>