[Elecraft] K3 slightly off frequency

[Don Wilhelm]

For all those having some similar occurrance - first make sure RIT and 
XIT are turned off.  The yellow LED in the lower left corner of the K3 
should be off for both transmit and receive.

73,
Don W3FPR

On 4/9/2017 5:42 PM, Dick via Elecraft wrote:
> I have a K3 kit that's been back to the factory for repair and alignment,
> and a K3S that was factory made and aligned.  Regardless which  one I'm
> using, most of the time when I get "spotted" by RBN, my  frequency is listed as
> being 100hz higher than listed on the  K3's front panel digital readout.