[Elecraft] K-Pod macros Around?

[Ron D'Eau Claire]

See the Owner's Manual (rev C) that I provided the link to:
http://www.elecraft.com/manual/E740285%20KPOD%20Owner's%20Manual%20Rev%20C.p
df

>From Page 7, "Operating the K-Pod": 

"Macros are launched at the K-Pod using tap and hold presses of switches F1
through F8 just as you tap and hold front panel switches on your K3S/K3:

"Holding switches F1 through F8 for 1/2 second or more launches K3S/K3
macros 1 through 8. Tapping switches F1 through F8 (holding for less than
1/2 second) launches K3S/K3 macros 9 through 16."

Of course, you choose which locations where you want to store each macro in
the K3 in the Utility program just as in the past, and locations 1 through
16 are automatically assigned to the K-Pod switches (buttons) as described
above. 

The owner's manual is growing as more information is added. 

73, Ron AC7AC

-----Original Message-----
From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Gary
Smith
Sent: Wednesday, September 28, 2016 9:23 PM
To: Jim McDonald
Cc: Elecraft at mailman.qth.net
Subject: Re: [Elecraft] K-Pod macros Around?

Beautiful! That's the Rosetta Stone I
needed; From 9 on down to 16 in the
Command Tester in the Utility: 

9 = F1
10 = F2
11 = F3

And so on to

16 - F8

Maybe they will mention that in the next Rev of the owner's manual.

Thank you all, now I'll have to figure out the more complex macros and how I
might want to use them but that will come. And thanks to those who provided
links to help me out as well, I will certainly check them out.

73,

Gary
KA1J

> 
>     Gary,
>      
>     Here are mine as of now:
>      
> 
>      
>     11 and 12 do what you want.  11 is F3 (tap), and 12 is F4 
>     (tap).
>      
>     73, Jim N7US
>      
>