[Elecraft] K-Pod macros Around?

[Gary Smith]

Beautiful! That's the Rosetta Stone I 
needed; From 9 on down to 16 in the 
Command Tester in the Utility: 

9 = F1
10 = F2
11 = F3

And so on to

16 - F8

Maybe they will mention that in the next 
Rev of the owner's manual.

Thank you all, now I'll have to figure out 
the more complex macros and how I might 
want to use them but that will come. And 
thanks to those who provided links to help 
me out as well, I will certainly check 
them out.

73,

Gary
KA1J

> 
>     Gary,
>      
>     Here are mine as of now:
>      
> 
>      
>     11 and 12 do what you want.  11 is F3 (tap), and 12 is F4 
>     (tap).
>      
>     73, Jim N7US
>      
>      
>     -----Original Message-----
>     From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On 
>     Behalf Of Gary Smith
>     Sent: September 28, 2016 22:41
>     To: Elecraft at mailman.qth.net
>     Subject: Re: [Elecraft] K-Pod macros Around?
>      
>     I've been trying to find the info I am
>     looking for but I must be dumber than a box of New England 
>     boulders.
>      
>     With the immediate goal of tapping the
>     K-Pod buttons to do the following:
>      
>     F3 = M3 (macro SWT35)
>     F4 = M4 (macro SWT39)
>     F7 = M1 (macro SWT21)
>     F8 = M2 (macro SWT31)
>      
>     I haven't found out how to make the F
>     buttons fire a specific macro. Some of the info below was 
>     very helpful, such as SWT21 and that helped me figure out 
>     more.
>      
>     But how do I ascribe a button on the K-Pod top a specific 
>     desired macro?
>      
>     > Well thanks! I got the K-Pod a bit ago but it's been 
>     unused because of
>     > other projects. My owner's manual only has 11 pages to it 
>     so there
>     > have been a lot of revisions in a short time.
>     >
>     > Thanks & 73,
>     >
>     > Gary
>     > KA1J
>     >
>     > > I believe what you want is in the Rev C K-Pod Owner's 
>     Manual on page
>     > > 16. IF you have an older version, you can download the 
>     Rev C manual
>     > > here:
>     > >
>     > > 
>     http://www.elecraft.com/manual/E740285%20KPOD%20Owner's%20Ma
>     nual%20R
>     > > ev %20C.p df
>     > >
>     > > For example, SWT21; will "tap" M1 on the K3, SWT32; will "tap"
>     M2 > > and so on. > > > > > > 73, Ron AC7AC > > > > -----Original
>     Message----- > > From: Elecraft
>     [mailto:elecraft-bounces at mailman.qth.net] On Behalf > > Of Gary
>     Smith Sent: Wednesday, September 28, 2016 3:43 PM To: > >
>     elecraft at mailman.qth.net Subject: [Elecraft] K-Pod macros Around?
>     > > > > It's time to finally start using the K-Pod. I had hoped it
>     might > > control the P3 as well as the K3s but apparently A P3
>     function not > > happening yet. > > > > I would though like to
>     assign the > > functions of the K3s memories M1-M4 to the K-Pod
>     and if someone > > knows of a page with macros for this & maybe
>     even other nifty Macro > > treasures, I'd appreciate a link > > >
>     > Thanks & 73, > > > > Gary > > KA1J > >
>     ____________________________________________________________ __ >
>     > Elecraft mailing list > > Home:
>     http://mailman.qth.net/mailman/listinfo/elecraft > > Help:
>     http://mailman.qth.net/mmfaq.htm > > Post:
>     mailto:Elecraft at mailman.qth.net > > > > This list hosted by:
>     http://www.qsl.net Please help support this > > email list:
>     http://www.qsl.net/donate.html Message delivered to > >
>     ron at elecraft.com > > > > > > > >
>     ____________________________________________________________ __ >
>     Elecraft mailing list > Home:
>     http://mailman.qth.net/mailman/listinfo/elecraft > Help:
>     http://mailman.qth.net/mmfaq.htm > Post:
>     mailto:Elecraft at mailman.qth.net > > This list hosted by:
>     http://www.qsl.net Please help support this email > list:
>     http://www.qsl.net/donate.html Message delivered to >
>     gary at ka1j.com >      
>     ____________________________________________________________ __
>     Elecraft mailing list Home:
>     http://mailman.qth.net/mailman/listinfo/elecraft Help:
>     http://mailman.qth.net/mmfaq.htm Post:
>     mailto:Elecraft at mailman.qth.net   This list hosted by:
>     http://www.qsl.net Please help support this email list:
>     http://www.qsl.net/donate.html Message delivered to jim at n7us.net