[Elecraft] XG2 not working on 3mhz or 14mhz

[w4grj at satterfield.org]

Don,
Touched the xtal solder points, that did the trick.
TNX
Jack
W4GRJ

On Sep 23, 2016, at 10:18 AM, Don Wilhelm <donwilh at embarqmail.com> wrote:

Jack,

The only things that are changed between bands are the crystals and the switch position.
If you do not have bad switch contacts (check with an ohmmeter), then you have bad crystals - try resoldering them.

73,
Don W3FPR

> On 9/23/2016 9:51 AM, Jack Satterfield wrote:
> Just tried my XG2 on a new radio, it's only working on 7.040
> 
> Tried on another radio to confirm it's the XG2, battery is good. Any
> suggestions to check why it's not working on all three freqs.
> 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to w4grj at satterfield.org