[Elecraft] XG2 not working on 3mhz or 14mhz

[Don Wilhelm]

Jack,

The only things that are changed between bands are the crystals and the 
switch position.
If you do not have bad switch contacts (check with an ohmmeter), then 
you have bad crystals - try resoldering them.

73,
Don W3FPR

On 9/23/2016 9:51 AM, Jack Satterfield wrote:
> Just tried my XG2 on a new radio, it's only working on 7.040
>
> Tried on another radio to confirm it's the XG2, battery is good. Any
> suggestions to check why it's not working on all three freqs.
>