[Elecraft] WSJT-X and K3S Tx

[Don Wilhelm]

Bret,

Reduce the soundcard level setting in your computer so you have a 
greater range of control with the MIC Gain setting.
Adjust so you get 4 bars solid with the 5th bar flashing.
7 bars is too much - you are driving into the ALC region.
The No ALC point for the K3 and K3S is at the 5th bar.

73,
Don W3FPR

On 9/17/2016 4:37 PM, MaverickNH wrote:
> Thanks for the replies all. Just back from travel - sorry for the silence.
>
> OK - on DATA A now and getting Rx on the waterfall. So Rx but no Tx.
>
> Nothing plugged to rear LINE IN jack, and MIC SEL to LInE In. The MIC level
> was indeed low, and bumping it to level 6 yields an ALC meter raeding of 7
> bars when in select TUNE from WSJT-X app. I hear the tone through my
> headphones, which might not be right - or is that just monitor?
>
>