[Elecraft] WSJT-X and K3S Tx

[MaverickNH]

Working to get WSJT 1.7 alpha running with my K3S. I saw some other posts but
found no solution. I can Rx just fine, just cannot Tx. Pressing TUNE on the
K3S gives Red TX LED and obvious Tx evidence from display with ATU TUNE
enabled.

Settings:Radio are Rig Elecraft K3/KX3, COM 7 (correct for my rig), Baud
Rtae 38400, Data Bits 8, Stop Bit 2, Handshake None, DTR/RTS blank, PTT
Method CAT, Mode USB, Split Operation Fake-it, Poll Interval 1s.

Band Hopping enabled, with CAT working fine it seems. The Settings: Radio
tab give a Green CAT and Red PTT when tested. But no sign of power out, even
though TX LED lights on K3S. MIC is adjusted to 23 such that USB voice gives
ALC to 4 with occasional spikes to 5. Increasing MIC while WSJT-X is TX'ing
doesn't budge ALC.

I must be overlooking some K3S setting (as usual). Appreciate some help!

Thanks, 73s,

Bret/N2SRN



--
View this message in context: http://elecraft.365791.n2.nabble.com/WSJT-X-and-K3S-Tx-tp7622439.html
Sent from the Elecraft mailing list archive at Nabble.com.