[Elecraft] Remote AC power switch?

[iain macdonnell - N6ML]

On Tue, Sep 13, 2016 at 8:04 AM, Jim Miller <jim at jtmiller.com> wrote:
> For those of you implementing remote operation: what are you using for an
> IP accessed power switch? I need one port to control station A/C power and
> another to toggle the K3s power control line on the ACC connector.

I use an old ("telnet" interface) WTI Network Power Switch that I
rescued from a recycle pile. Digital Loggers Inc make a
good/inexpensive "Web Power Switch".

For powering-on the K3 via ACC pin 8, I use a RS232 port on an onsite
PC, with the same simple circuit used for FSK keying.

73,

    ~iain / N6ML