[Elecraft] Commander in DxLab locking up

[tomb18]

HiMy edgeport mutiserial port usb device will lock up as well as any software when I transmit at over 100w on 160 and 80m. The only thing that will restore things is to do a power down. Its possible that you may have an rfi issue. Check any usb hubs too. 73 Tom 


Sent from my Samsung Galaxy smartphone.
-------- Original message --------From: Jerry <jerry at molaver.org> Date: 2016-09-11  4:30 PM  (GMT-05:00) To: Elecraft at mailman.qth.net Subject: [Elecraft] Commander in DxLab locking up 
I have been successfully using DxLab as my logging/control program for my K3S for a few months now. About 2 weeks ago and again yesterday the Commander module locks up. If I am not attentive it ends up logging contacts on the 'locked up' freq and mode.
I am using a new HP computer in the shack with Windows 10 connecting to the K3S with the USB port.
The applications manager is unable to force Commander down. The only choice I have is to close everything else n then manually turn off the computer. When it reboots all is good.
I have started to shut down Commander when I shut off the K3S - the computer runs 24/7 as there are scripts running for auto backup to my NAS.
My issue sounds somewhat familiar to a recent post here.
Any suggestions where to start?




Life is short
Ride hard
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tomb18 at videotron.ca