[Elecraft] K3 Mini Error question

[Oliver Dröse]

Jim,

it's just an error report that there's no connection to the remote side. 
All fine as your remote is not connected yet. ;-)

SIP is the Session Initiation Protocol, basically the standard to 
initiate a digital phone contact (the RRC's are using exactly that, an 
VoIP connection).

73, Olli - DH8BQA
(SOSB10 in CQWW thus time to answer, hihi)

Contest, DX & radio projects: http://www.dh8bqa.de


Am 29.10.2016 um 23:26 schrieb Jim Cary:
> I just packed up both my control and remote systems and moved them down to my ZF QTH, where they will be permanent.
>
> I have the K3 mini hooked up to the control RRC unit, but haven’t hooked up the remote unit yet/
>
> When I powered up the mini, and turned the volume control I got a three tone warning signal.  The light over the aux/mic cable is flashing yellow, which according to the Remote Rig manual means the SIP connection has failed…. but it isn’t clear what that means or what to do about it.  I’ve checked and doubled checked all the connections and they look good.
>
> Does anyone not in the CQ contest (!!!) have an idea?
>
> Jim
> W2SM
> ZF2LC
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to droese at necg.de