[Elecraft] (no subject)

[Dimitry Borzenko]

Hello.
Have check now and find - PTT setting is not saved.
I have set it to RTS-OFF, after turning off (by power button, not by power
supply) and turning on again -  setting of PTT is  OFF-OFF.
s/n of TRX is 10944 with firmware 5.50.

Regards.


-----Original Message-----
From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Don
Wilhelm
Sent: Monday, October 24, 2016 5:14 PM
To: Jeff <w7jw at arrl.net>; Elecraft at mailman.qth.net
Subject: Re: [Elecraft] (no subject)

Jeff,

I have no idea what you are doing wrong, but here are a few thoughts:
After making the menu change, are you exiting from the menu? Tap the MENU
button.
Are you 'pulling the plug" when you say you turn the radio off and back on?
Just like your computer, you must use the POWER button if the state is to be
saved.

Do you have anything plugged into the USB or RS-232 port that might be
causing a command to reset the menu entry?  Pull out the USB cable and/or
the RS-232 cable and try again.

73,
Don W3FPR

On 10/24/2016 9:24 AM, Jeff wrote:
> Good morning.  I am having a problem getting my K3S to save in the config
menu the setting for PTT-PTT. When I set it for RTS-DTR, hit menu it works
fine.  Then I turn the radio off and back on and the PTT-PTT setting is back
to OFF-OFF. What am I doing wrong? How do I get the Config menu to save the
PTT-PTT setting to RTS-DTR?
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to 4z5cp at bezeqint.net