[Elecraft] (no subject)

[Don Wilhelm]

Jeff,

I have no idea what you are doing wrong, but here are a few thoughts:
After making the menu change, are you exiting from the menu? Tap the 
MENU button.
Are you 'pulling the plug" when you say you turn the radio off and back 
on?  Just like your computer, you must use the POWER button if the state 
is to be saved.

Do you have anything plugged into the USB or RS-232 port that might be 
causing a command to reset the menu entry?  Pull out the USB cable 
and/or the RS-232 cable and try again.

73,
Don W3FPR

On 10/24/2016 9:24 AM, Jeff wrote:
> Good morning.  I am having a problem getting my K3S to save in the config menu the setting for PTT-PTT. When I set it for RTS-DTR, hit menu it works fine.  Then I turn the radio off and back on and the PTT-PTT setting is back to OFF-OFF. What am I doing wrong? How do I get the Config menu to save the PTT-PTT setting to RTS-DTR?
>