[Elecraft] K2 - low power/reception on 80m

[Don Wilhelm]

Phil,

The next logical step is to do Transmit Signal Tracing as described in 
Appendix E of the manual.  Use 80 meters instead of 40.

When you come to the first point where the RF Voltage is substatially 
less than the Expected value, that is the output of the problem stage.  
You can then examine the schematic to see the components associated with 
that stage and evaluate each individually.

73,
Don W3FPR

On 10/1/2016 2:00 PM, Philippe wrote:
> On Thu, Sep 29, 2016 at 07:12:58PM -0400, Don Wilhelm wrote:
> I need to go 'deeper'.