[Elecraft] K2 - low power/reception on 80m

[Philippe]

On Thu, Sep 29, 2016 at 07:12:58PM -0400, Don Wilhelm wrote:
> Phil,
> 
> Don't be too quick to draw that conclusion.
> Note that everything in the Low Pass Filter will appear to be connected to
> ground at DC.  If you want to make a valid DC resistance check, you have to
> lift lead 4 of T4 and re-measure.
> 

Thanks Don.
You was right, the 2 relays are fine (tested after I lifted T4 lead 4 as suggested).
I checked also L16 and L17. I removed L17 because I wasn't sure it was properly stripped, and re-soldered it.
I still have an issue on RX and TX on 80m. :(

I need to go 'deeper'.

73,
Phil.

-- 
Philippe Givet
F5IYJ / NK2F