[Elecraft] K3S Band data 1 connection to the Yaesu VL1000 query

[Don Wilhelm]

Tom,

It sounds to me like the cable does not include the keying signal to the 
amp.

Try putting a cable from the K3S KEYOUT jack to the amp KEYIN (or 
whatever it is named) - RCA mono cable - and see if it works.

Caution: I know nothing about that amp or the cable - it just "seems to 
me---".

73,
Don W3FPR

On 11/30/2016 5:48 PM, Thomas Donohue wrote:
> Hi to all:
>
> This subject has been posted before and I found the answer on the Elecraft historical threads web page. In any event I tried the recommended solution but have not been able to get the K3S to key the VL1000.
>
> Specifically, I’m using a Band data one cable put together by Array Solutions (designator K3VL1K1) to connect the ACC output on the K3S to the Band data 1 input on the VL1000. With the VL1000 turned off and the power supply turned on, I can use the K3S on all bands FB; When I turn the VL1000 on and select input 1, I can use the K3S on all bands, with auto band switching by the VL1000. However, when I press the operate button on the VL1000, the unit will not key on any band, but the auto band switching function on the VL1000 continues to work. My initial thought is that the K3VL1K1 is not wired correctly and will not key the amp. But, when I checked the wiring it appeared to be wired correctly. So my query is (1)Is the K3VL1K1 the correct cable for what I’m trying to do (i.e. auto band switch and key the amplifier?, and if it is the correct cable is there a config menu setting that needs to be implemented (i’ve checked and haven’t found any)?, or is there something I’m missing or not doing. Any thoughts or advice will be appreciated.
>
> Best 73,
> Tom/W1QU
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to donwilh at embarqmail.com
>