[Elecraft] K3 and Signallink next the Microham

[Ross]

Thanks for the comments.
The Microham is the Keyer II.
I have connected the line in,line out and the usb cable to the pc, are there 
any other connections I need to make??
Yes the multicore cable from the k3 is the one for the k3 it is marked k3.
Thanks
Ross
-----Original Message----- 
From: Joe Subich, W4TV
Sent: Monday, May 30, 2016 2:21 PM
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] K3 and Signallink next the Microham


> Next to try and set up the microham for digital work.

Which microHAM Interface?

In general, set the K3/K3S to DATA mode and select MENU:MIC SEL =
LINE IN, set Mic Gain (LINE) to about 15 and configure the microHAM
interface audio levels as documented in the "Setting Audio Levels"
section of the microHAM Users Manual.  As a final "touch up" adjust
the K3 "Mic Gain" for four bars of ALC (the fifth bar can flicker).


73,

    ... Joe, W4TV

On 5/29/2016 6:54 PM, Ross wrote:
> Thanks for all the comments about the signal link.
> I found the problem when checking Airlink express, I had the volume and tx 
> levels set to almost zero, in Airlink express so whenI reset them to max, 
> everything popped into life and all my other digital programs then worked 
> perfectly.
>
> Next to try and set up the microham for digital work.
> All advice very gratefully accepted.
> Thanks
> Ross
> ZL1WN
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to lists at subich.com
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to rbiggar at ihug.co.nz