[Elecraft] KAT500 with KX3

[Michael Blake]

Yes Bill, I believe that is correct but I want it to band follow so that the solution will be set to the last correct solution for the current frequency when only receiving.  It follows the K3/KPA500  and the the question is “how do I implement this with the KX3?

Michael Blake







> On May 19, 2016, at 12:24 PM, Nr4c <nr4c at widomaker.com> wrote:
> 
> I believe it will sense RF on a dit or two. So only the coax is required.  
> 
> Sent from my iPhone
> ...nr4c. bill
> 
> 
>> On May 19, 2016, at 11:06 AM, Michael Blake <k9jri at mac.com> wrote:
>> 
>> Which data connection(s) do I use to control the band/frequency settings on the KAT500 when the transceiver is a KX3?  The amplifier is a low drive modified ALS-600 which seems like a straight forward keying connection but I am not sure about the data connection from the KX3’s E980232 "Cable Adapter 6” RCA & 3.5mm”.
>> 
>> Stated differently which interconnecting cables do I need to order to cause the KAT500 to frequency track the KX3?
>> 
>> Michael Blake
>> 
>> 
>> 
>> 
>> 
>> 
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to nr4c at widomaker.com
>