[Elecraft] KAT500 with KX3

[Nr4c]

I believe it will sense RF on a dit or two. So only the coax is required.  

Sent from my iPhone
...nr4c. bill


> On May 19, 2016, at 11:06 AM, Michael Blake <k9jri at mac.com> wrote:
> 
> Which data connection(s) do I use to control the band/frequency settings on the KAT500 when the transceiver is a KX3?  The amplifier is a low drive modified ALS-600 which seems like a straight forward keying connection but I am not sure about the data connection from the KX3’s E980232 "Cable Adapter 6” RCA & 3.5mm”.
> 
> Stated differently which interconnecting cables do I need to order to cause the KAT500 to frequency track the KX3?
> 
> Michael Blake
> k9jri at mac.com <mailto:k9jri at icloud.com>
> 
> 
> 
> 
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nr4c at widomaker.com