[Elecraft] KPA3 pin question

[Nr4c]

Most likely an "indexing" feature to insure proper connector alignment. 

Sent from my iPhone
...nr4c. bill


> On Mar 30, 2016, at 5:14 PM, "kevinr at coho.net" <kevinr at coho.net> wrote:
> 
> I have successfully removed the KPA3 module and find one pin missing.  On P68A pin # 6 is broken or cut flush with the header. The corresponding socket opening seems to be filled with a plug. Since I am not seeing any broken pin in the socket I think this is the way it was designed.  But as long as I have it open and the problem is power out I may as well ask what is most probably a silly question.
> 
> Any takers?
>    73,
>        Kevin.  KD5ONS
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nr4c at widomaker.com