[Elecraft] KPA3 pin question

[kevinr at coho.net]

Never mind.  The schematic says nothing is connected to pin 5 or 6.
     Kevin.

On 3/30/2016 2:14 PM, kevinr at coho.net wrote:
> I have successfully removed the KPA3 module and find one pin missing.  
> On P68A pin # 6 is broken or cut flush with the header. The 
> corresponding socket opening seems to be filled with a plug. Since I 
> am not seeing any broken pin in the socket I think this is the way it 
> was designed.  But as long as I have it open and the problem is power 
> out I may as well ask what is most probably a silly question.
>
> Any takers?
>     73,
>         Kevin.  KD5ONS
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to kevinr at coho.net
>