[Elecraft] K3s no TX

[Jerry Moore]

Press and release the pwr/mon button until pwr is lit, then rotate the dial
to the right.. read the power setting on the sub rx area.

-----Original Message-----
From: chris grier [mailto:chris.yln at blueyonder.co.uk] 
Sent: Tuesday, March 15, 2016 5:48 PM
To: Jerry Moore; elecraft at mailman.qth.net
Subject: Re: [Elecraft] K3s no TX

the tx light lights when the key is pressed and I can hear a weak sig in
another RX so the PA pre driver is working I dont have the auto atu so only
got one ant socket

On 15/03/2016 20:53, Jerry Moore wrote:
> Mode? Is the TX light flashing? Which antenna is selected? Is SWR
indicated?
> Does the RED led light when you key down?
>
> Try Cw MODE, ANT1, if you have the ATU installed bypass it for testing..
> jer
>
> -----Original Message-----
> From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of 
> chris grier
> Sent: Tuesday, March 15, 2016 2:49 PM
> To: elecraft at mailman.qth.net
> Subject: [Elecraft] K3s no TX
>
> HI I switched on my K3s today and there is no RF coming out of it when 
> I press my Key I can hear that the pre driver is working by using 
> another RX, Has this happened to anyone on the list, looks like the PA 
> has stopped working.be fore I contact Elecraft thanks  Chris 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html Message delivered to 
> jermo at carolinaheli.com
>