[Elecraft] K3s no TX

[chris grier]

the tx light lights when the key is pressed and I can hear a weak sig in 
another RX so the PA pre driver is working
I dont have the auto atu so only got one ant socket

On 15/03/2016 20:53, Jerry Moore wrote:
> Mode? Is the TX light flashing? Which antenna is selected? Is SWR indicated?
> Does the RED led light when you key down?
>
> Try Cw MODE, ANT1, if you have the ATU installed bypass it for testing..
> jer
>
> -----Original Message-----
> From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of chris
> grier
> Sent: Tuesday, March 15, 2016 2:49 PM
> To: elecraft at mailman.qth.net
> Subject: [Elecraft] K3s no TX
>
> HI I switched on my K3s today and there is no RF coming out of it when I
> press my Key I can hear that the pre driver is working by using another RX,
> Has this happened to anyone on the list, looks like the PA has stopped
> working.be fore I contact Elecraft thanks  Chris
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html Message
> delivered to jermo at carolinaheli.com
>