[Elecraft] Oddity in K3 with new synthesizer

[Clay Autery]

Technically, whether the 20 Hz correction is within spec depends upon
the frequency where the measurement was taken...

At 20 MHz, the 20 Hz correction is AT the spec limit.

Above 20 MHz, the correction would be WITHIN the spec.

Anything BELOW 20 MHz, a 20 Hz correction is OUTSIDE the spec.

Have an awesome day!  Back to building...


On 3/5/2016 11:57 AM, GRANT YOUNGMAN wrote:
> 20 Hz is well within the +/- 1 ppm (or the “typical +/- 0.5 ppm) spec of the TCXO ...
>
> Grant NQ5T
> K3 #2091, KX3 #8342

______________________
Clay Autery, KG5LKV
MONTAC Enterprises
(318) 518-1389