[Elecraft] Help with K3

[Don Wilhelm]

Roger,

It may be that the driver IC for the LEDs has been damaged.  There is 5 
volts on the LEDs, but the driver IC has to bring the other lead near 
zero volts to light the LED.
If you did not work on an anti-static mat when doing the connector 
change, that may be the blame.
But just the same, re-check the soldering on the connectors you changed.

73,
Don W3FPR

On 6/23/2016 5:28 PM, Roger D Johnson wrote:
> The rig with no front panel LEDs working is a K3.
>
> I do have 5 volt power to the LEDs.
>