[Elecraft] Power has disappeared, additional info.

[Barry Simpson]

Hi Chris

It sounds as if you have put the rig into Test mode - the middle button on
the far left of the front panel.

Barry  VK2BJ

On 27 July 2016 at 21:34, Chris Kimball <mail at cvkimball.com> wrote:

> Thanks to all who responded.  Alas, the problem continues.
>
> Let me respond to the queries to date:
>
> 1. The rig is a recent K3S (100W).
> 2. The KPAT is on, "PA nor".
> 3. The circuit breaker seems fine.  No red showing on button, button feels
> loose.
> 4. Operation is into a dummy load, without wattmeter.
>
> I've tried using the TUNE button, setting the TUN PWR level to 20W. On
> pushing TUNE, the panel says 0 W, even though it was set to 20W.
>
> In CW mode, the ALC shows reasonable ALC movement on CW sending.  RF output
> remains at 1 segment.
>
> Note: No error message has been received of any kind.  All operation, other
> than RF output, is fine.
>
> The last contact I had before leaving on the trip was on SSB just to set up
> the mike. All worked fine on 20 m.  Perhaps I "hit" something in playing
> with SSB.
>
>
>
>
>
> --
> View this message in context:
> http://elecraft.365791.n2.nabble.com/Power-has-disappeared-tp7620735p7620748.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to vk2bj at optusnet.com.au
>