[Elecraft] Failed K3 Firmware update DSP1

[Matthew Lawson]

I have the current one only (1.16.6.25). I don't have any older files. just
what I have been able to download lately.

*Matthew Lawson*
*KC7EQO*
*442.100 + 100 Hz PL Blyn Mt Repeater*


*http://www.qrz.com/db/KC7EQO/R <http://www.qrz.com/db/KC7EQO/R>*
<http:///www.linkedin.com/in/mlawsonkc7eqo>

On Sun, Jul 17, 2016 at 8:55 AM, Nr4c <nr4c at widomaker.com> wrote:

> Do you have the last utility?
>
> Sent from my iPhone
> ...nr4c. bill
>
>
> > On Jul 17, 2016, at 3:58 AM, Matthew Lawson <kc7eqo at gmail.com> wrote:
> >
> > Please help, went to update my K3 to the latest Firmware (was running
> 2.19)
> > all updated fine until DSP1.
> >
> > 00:33:01 Loaded DSP1 firmware revision 02.86
> > K3 responded with revision ??.??
> > 00:33:01 DSP1 verification failed. Reload DSP1.
> > 00:33:01 Error code 0xE2000046: Revision number verification failed
> > 00:33:01 DSP1 verification failed. Reload DSP1.
> > 00:33:01 Click "Close" to close this window
> >
> > More detailed verbose:
> >
> > LoadDspDataTableState Response "A"   0 ms
> > ResetMcuState Send "LDD20000;"
> > Waiting 6 seconds for reset to complete
> > ResetMcuState Response "A"  15 ms
> > ResetMcuState Timer Elapsed 5500 ms
> > DetermineSpeedState Send ";"
> > DetermineSpeedState Response ";"  15 ms
> > QueryMainDspRevisionState Send "RVD;"
> > QueryMainDspRevisionState Response "RVD00.00;"  16 ms
> > Loaded DSP1 firmware revision 02.86
> > K3 responded with revision ??.??
> > DSP1 verification failed. Reload DSP1.
> > Error code 0xE2000046: Revision number verification failed
> > DSP1 verification failed. Reload DSP1.
> > Click "Close" to close this window
> >
> > Computer I am using has hardware RS232 ports, two of them, and I have
> tried
> > either one with the same results. I am using the latest K3 Utility
> > 1.16.6.25.
> > My K3's serial number is 01341.
> > Everything seems to load fine but fails the DSP1.
> >
> > I have tried reloading and re-downloading, rebooting, both computer and
> K3.
> >
> > I also looked into downgrading to an older firmware, but I can not find
> an
> > older archive that goes back far enough to my working configuration,
> 2.19.
> >
> > I did try what was archived and got the same results. (ftp directory)
> >
> > Please help. I also searched the forums with no avail. most were USB
> > adapter problems.
> >
> > 73
> >
> >
> > This has rendered my K3 useless.
> >
> > *Matthew Lawson*
> > *KC7EQO*
> > *442.100 + 100 Hz PL Blyn Mt Repeater*
> >
> >
> > *http://www.qrz.com/db/KC7EQO/R <http://www.qrz.com/db/KC7EQO/R>*
> > <http:///www.linkedin.com/in/mlawsonkc7eqo>
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to nr4c at widomaker.com
>