[Elecraft] [KPOD] Re: Now that the K-Pod is shipping, (longer RJ12 cable)

[Ron D'Eau Claire]

Clay. That's a typo. See appendix B of the manual. 

Tnx for the head's up. That's an old reference that should be been removed. 

73, Ron AC7AC

-----Original Message-----
From: Clay Autery [mailto:cautery at montac.com] 
Sent: Friday, July 15, 2016 8:35 PM
To: Ron D'Eau Claire; elecraft at mailman.qth.net
Subject: Re: [Elecraft] [KPOD] Re: Now that the K-Pod is shipping, (longer
RJ12 cable)

RR...  I just cracked the K-pod manual and see that the cable is an
RJ-25 cable...  different pinouts from the RJ-12.  (both 6P6C).

I need the signals crossed with the pin numbers...  or colors...

No schematics for the K3s...  I guess I'll try the K3 manual to see if it is
at all illuminating...

______________________
Clay Autery, KY5G
MONTAC Enterprises
(318) 518-1389

On 7/15/2016 9:36 PM, Ron D'Eau Claire wrote:
> Don is correct but, actually, the connector is a 6PC6 male. The "RJ" 
> numbers refer to the wiring AND connector. So it is NOT an RJ12 cable 
> since only 5 conductors are used.
>
> 73, Ron AC7AC
>
>
> ---