[Elecraft] [KPOD] Re: Now that the K-Pod is shipping, (longer RJ12 cable)

[Don Wilhelm]

Clay,

The K3 and K3S schematics are the same with respect to that connector.

73,
Don W3FPR

On 7/15/2016 11:35 PM, Clay Autery wrote:
> RR...  I just cracked the K-pod manual and see that the cable is an
> RJ-25 cable...  different pinouts from the RJ-12.  (both 6P6C).
>
> I need the signals crossed with the pin numbers...  or colors...
>
> No schematics for the K3s...  I guess I'll try the K3 manual to see if
> it is at all illuminating...
>
> ______________________
> Clay Autery, KY5G
> MONTAC Enterprises
> (318) 518-1389
>
> On 7/15/2016 9:36 PM, Ron D'Eau Claire wrote:
>> Don is correct but, actually, the connector is a 6PC6 male. The "RJ" numbers
>> refer to the wiring AND connector. So it is NOT an RJ12 cable since only 5
>> conductors are used.
>>
>> 73, Ron AC7AC
>>
>>
>> ---
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to donwilh at embarqmail.com
>