[Elecraft] Key out delay for end of TX?

[Bob McGraw K4TAX]

WOW!  It works.   Thank you........I'd missed that one.  Geez, seems I 
can or need to learn something every day.  :-)

73
Bob, K4TAX
K3S s/n 10163


On 1/26/2016 9:35 AM, Ken K3IU wrote:
> Hi Bob:
>
> You can just put the K3 in SEMI breakin  mode (Press hold QSK button 
> on Band UP) and set the delay to whatever you want by adjusting the 
> DELAY (press hold SPEED MIC and turn knob to adjust). I believe that 
> should produce the result you are seeking.
>
> 73, Ken K3IU
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> On 1/26/2016 10:21 AM, Bob McGraw K4TAX wrote:
>> One issue I'm trying to resolve is a manner to keep the KEY OUT 
>> active in between CW elements.  This of course would negate QSK 
>> operation but the repeated clatter of an external relay is most 
>> annoying.
>>
>> Any help or suggestions?
>>
>>
>> 73
>> Bob, K4TAX
>>
>> On 1/26/2016 9:15 AM, Jim Miller wrote:
>>> There is a Keyout to RF out default (adjustable) delay of 8ms on the 
>>> K3.
>>>
>>> What is the spec for RF out going inactive to Keyout going inactive?
>>>
>>> Thanks
>>>
>>> Jim ab3cv
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft at mailman.qth.net
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>> Message delivered to rmcgraw at blomand.net
>>>
>>
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to kenk3iu at cox.net
>>
>
>