[Elecraft] Key out delay for end of TX?

[Ken K3IU]

Hi Bob:

You can just put the K3 in SEMI breakin  mode (Press hold 
QSK button on Band UP) and set the delay to whatever you 
want by adjusting the DELAY (press hold SPEED MIC and turn 
knob to adjust). I believe that should produce the result 
you are seeking.

73, Ken K3IU
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
On 1/26/2016 10:21 AM, Bob McGraw K4TAX wrote:
> One issue I'm trying to resolve is a manner to keep the 
> KEY OUT active in between CW elements.  This of course 
> would negate QSK operation but the repeated clatter of an 
> external relay is most annoying.
>
> Any help or suggestions?
>
>
> 73
> Bob, K4TAX
>
> On 1/26/2016 9:15 AM, Jim Miller wrote:
>> There is a Keyout to RF out default (adjustable) delay of 
>> 8ms on the K3.
>>
>> What is the spec for RF out going inactive to Keyout 
>> going inactive?
>>
>> Thanks
>>
>> Jim ab3cv
>> ______________________________________________________________ 
>>
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: 
>> http://www.qsl.net/donate.html
>> Message delivered to rmcgraw at blomand.net
>>
>
>
> ______________________________________________________________ 
>
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: 
> http://www.qsl.net/donate.html
> Message delivered to kenk3iu at cox.net
>