[Elecraft] K3S and WSJT-X

[Bob McGraw K4TAX]

I'll make screen shots if needed.   Be sure you have CAT interface 
working and then the correct AUDIO CODEC selected in the application.  
The radio should be in Data mode.  When you select TUNE you should hear 
the tone in the MONITOR, radio should switch to transmit,  the PWR 
slider to the right controls the audio level. The Speaker CODEC on the 
computer should be about 50%.   This should have about 4 to 5 bars 
showing on the ALC meter.   Line gain on the radio at about #20.

73
Bob, K4TAX



On 1/25/2016 3:53 PM, Ian wrote:
> WSJT-X 1.6.0, PTT method = CAT, VOX enabled on K3S, 50w pwr but no envelope
> on the P3
>   
>
> -----Original Message-----
> From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Tom
> Crayner
> Sent: Monday, January 25, 2016 16:19
> To: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] K3S and WSJT-X
>
> Ian,
>
> Which rev level of WSJT-X are you trying to use?
>
> I seem to recall 1.5.x had some issues with Hamlib and as a result some of
> the PTT code was broke.
>
> If you are running 1.6.0 I think the Hamlib stuff is fixed and you can use
> K3/KX3 as a rig and then set PTT to CAT.
>
> If you plan on running DX Commander at some point you can install it,
> configure it to mange the radio under the config->port options of DX
> Commander and then point WSJT-X to it by selecting DX Commander as the "rig"
> in Settings->Radio.  Then DX COmmander does the heavy lifting and avoids the
> broken Hamlib piece. This should work in 1.5.x and 1.6.
>
> Tom (W2YF)
>
>
> On Mon, Jan 25, 2016 at 11:52 AM, Ian <ik7565 at verizon.net> wrote:
>
>> I have a single USB cable between the K3S and the laptop and no
>> problem decoding JT65 signals with DATA A.  "CAT Control" is set for
>> COM4 and 38400-N-8-1.  Any hints on setting the "PTT Method" parameters?
>>
>>
>>
>> 73, Ian N8IK
>>
>> s/n 10111
>>
>>
>>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html Message
> delivered to ik7565 at verizon.net
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2016.0.7357 / Virus Database: 4522/11485 - Release Date: 01/25/16
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rmcgraw at blomand.net
>