[Elecraft] K3S and WSJT-X

[Ian]

WSJT-X 1.6.0, PTT method = CAT, VOX enabled on K3S, 50w pwr but no envelope
on the P3
 

-----Original Message-----
From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Tom
Crayner
Sent: Monday, January 25, 2016 16:19
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] K3S and WSJT-X

Ian,

Which rev level of WSJT-X are you trying to use?

I seem to recall 1.5.x had some issues with Hamlib and as a result some of
the PTT code was broke.

If you are running 1.6.0 I think the Hamlib stuff is fixed and you can use
K3/KX3 as a rig and then set PTT to CAT.

If you plan on running DX Commander at some point you can install it,
configure it to mange the radio under the config->port options of DX
Commander and then point WSJT-X to it by selecting DX Commander as the "rig"
in Settings->Radio.  Then DX COmmander does the heavy lifting and avoids the
broken Hamlib piece. This should work in 1.5.x and 1.6.

Tom (W2YF)


On Mon, Jan 25, 2016 at 11:52 AM, Ian <ik7565 at verizon.net> wrote:

> I have a single USB cable between the K3S and the laptop and no 
> problem decoding JT65 signals with DATA A.  "CAT Control" is set for 
> COM4 and 38400-N-8-1.  Any hints on setting the "PTT Method" parameters?
>
>
>
> 73, Ian N8IK
>
> s/n 10111
>
>
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to ik7565 at verizon.net
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2016.0.7357 / Virus Database: 4522/11485 - Release Date: 01/25/16