[Elecraft] [PX3] - symmetrical reflections about the center point

[kevino z]

Thank you - that did it 

-----
The problem with the world is that the intelligent people are full of doubts, while the stupid ones are full of confidence.

> On Jan 14, 2016, at 14:55, Eric Swartz - WA6HHQ, Elecraft <eric at elecraft.com> wrote:
> 
> Hi Kevin,
> 
> Try removing each end of the IQ cable between the KX3 and PX3 and firmly re-inserting it. What you are seeing usually is the result of one end not being fully inserted in the jack, leaving one of the IQ lines open. 
> 
> Eric
> elecraft.com
> 
>> On 1/10/2016 4:42 AM, kevino z wrote:
>> Not sure if it was the loading of the new KX3 firmware, or if I changed some settings, but now on my PX3 panadapter, I see everything symmetrically mirrored around the center. So for example, If there is a signal at Center frequency -50kHz, it appears at +50kHz too. As I move the VFO, the signals eventually converge and pass through the middle on their way to the ends of the display.Anyone have any idea how to fix this, or what I did to get in this mess?thank you -Kevin (KK4YEL) 		 	   		  
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to eric.swartz at elecraft.com
>> 
>