[Elecraft] K3 upgrade with USB and p3 using cblp3y cable.

[Cady, Fred]

Hi John,
Make sure the RJ45 is plugged all the way in.  You should hear a definite click when it is seated properly.
73,
Fred KE7X

For all KE7X Elecraft books, see www.ke7x.com

________________________________________
From: Elecraft <elecraft-bounces at mailman.qth.net> on behalf of John Buck <kh7t at arrl.net>
Sent: Thursday, January 7, 2016 6:53 PM
To: Elecraft at mailman.qth.net
Subject: [Elecraft] K3 upgrade with USB and p3 using cblp3y cable.

How do I get my Frequency display back while using the usb cable to the
computer.
The P3 utility seems to be working.  I seem to have the latest firmware
and utilities.

All I can find is the the frequency display on P3 works with rs232. It was.

I cannot get it with the CB3Y.

I checked the switch on the KIO3B board.  It is in the right position.

If it is documented, where?

John KH7T
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to fcady at montana.edu