[Elecraft] K3 upgrade with USB and p3 using cblp3y cable.

[Nr4c]

Check the K3S manual on cabling the P3 with the "Y" cable. I don't have the manual handy but it is quite easy. USB cable to K3S and then the Y cable connects to both P3 sockets and the RJ45 on back of K3S. Set K3S RS232 to USB. 

Sent from my iPhone
...nr4c. bill


> On Jan 7, 2016, at 8:53 PM, John Buck <kh7t at arrl.net> wrote:
> 
> How do I get my Frequency display back while using the usb cable to the computer.
> The P3 utility seems to be working.  I seem to have the latest firmware and utilities.
> 
> All I can find is the the frequency display on P3 works with rs232. It was.
> 
> I cannot get it with the CB3Y.
> 
> I checked the switch on the KIO3B board.  It is in the right position.
> 
> If it is documented, where?
> 
> John KH7T
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nr4c at widomaker.com