[Elecraft] Diversity Mode filter selection question

[Guy Olinger K2AV]

In the filter configurations the filter lineup and width definitions must
be identical or you will get state changes in the main and sub RX that do
not happen at the same time in diversity.  If the filter offsets are
incorrect you can get a similar effect.

73, Guy K2AV

On Tuesday, February 23, 2016, Bill OMara via Elecraft <
elecraft at mailman.qth.net> wrote:

> I'm the proud owner of four K3 radios at my contest station and one of my
> new K3 (89XX) is doing something different than the other three and I'm
> trying to understand what it's doing.
>
>
>
> In the diversity mode as I change the width control and reach the selection
> points for different CW filters to be selected I hear what sounds like two
> (one after the other) clicks of what I'm guessing is the two new filters
> being selected as the width is either decreased of increased. This same
> dual
> clicking sounds happen at each filter selection point.
>
>
>
> What's weird is that the other three K3 radio don't do this.  Is it a
> different configuration setting?  If so, what is the configuration setting?
>
>
>
> This same radio doesn't make any clicking sound when changing the width
> control, filters when it's NOT in diversity mode.
>
>
>
> Any ideas of what happening and why?
>
>
>
> Thanks for any help.
>
>
>
> 73 Bill  W4RM
>
>
>
> Please use W4RM at AOL.COM <javascript:;> <mailto:W4RM at AOL.COM <javascript:;>>
> as my primary account
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net <javascript:;>
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to k2av.guy at gmail.com <javascript:;>
>


-- 
Sent via Gmail Mobile on my iPhone