[Elecraft] Best Coax for Jumpers and Interconnections for SO2R operation with K3 & KX3
Robert Nobis
n7rjn at nobis.net
Tue Feb 23 16:46:24 EST 2016
Dave,
Thank you. RG223 looks like reasonably good cable. Not sure about LMR-240. I have had a bad experience with the dissimilar metals (copper and aluminum) with the LMR cable, although it was for a repeater application outdoors.
73,
Bob Nobis - N7RJN
n7rjn at nobis.net
> On Feb 23, 2016, at 11:58, David Kuechenmeister <n4kd at bellsouth.net> wrote:
>
> Best possible could run into some money. You can get Pasternack to build a 36 in. jumper from RG223 ( double shielded and very small bend radius) for about $35. You can buy the parts for about $22 and DIY. http://www.pasternack.com/showProduct.aspx?SEName=uhf-male-uhf-male-rg223u-cable-assembly-pe3w00408&ProductID=
>
> But I think LMR-240 UF is pretty good. It's got a foil and braid shield. It's what I use and I crimp/solder UHF connectors that I get from Max-Gain systems.
> The sheathing on the bury flex is a little stiffer than I like to deal with.
> vy 73,Dave N4KD
>
> On Tuesday, February 23, 2016 12:12 PM, Robert Nobis <n7rjn at nobis.net> wrote:
>
>
> I am in the process of setting up my shack for SO2R operation with my K3 and KX3. Just wondering what the best coax type to use for jumpers and interconnections within the shack? I want to make sure I have the best possible isolation between the two rigs.
>
> Thanks and 73,
>
>
> Bob Nobis - N7RJN
> n7rjn at nobis.net
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n4kd at bellsouth.net
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n7rjn at nobis.net
More information about the Elecraft
mailing list