[Elecraft] data modes (USB/LSB or DATA) using KIO3B sound card interface

[Bob McGraw K4TAX]

I have the K3S USB cable connected direct to one of the USB ports on the 
computer.  As to radio set-up, see page 33 of the manual for details.  I 
use DATA A mode for PSK & other data modes.   The software is usually 
FLDIGI, HRD/DM780 or WSJT-X which all work under Windows 10 successfully 
and do control all aspects of the radio. The DATA A mode is not the 
typical or normal USB/LSB mode in that it releases any TX EQ and CMP 
values used for SSB.

The computer Device Manager reports the radio under "Ports (COM & LPT)" 
as "USB Serial Port (COM 5)".  Depending on your computer, your port 
number may be different.

Audio, PTT and CAT control of the radio is handled by the single USB 
cable installation. None of the rear panel connections are used other 
than the USB port on the radio.

73
Bob, K4TAX



On 2/11/2016 3:34 PM, John Shadle wrote:
> I looked in the K3S manual, and the instructions on setting up data modes
> (p. 33) fail to mention the use of the KIO3B internal sound card. Are there
> instructions (erratum?) available on how to set up data modes (using DATA
> or USB/LSB) with this new feature?
>
> Probably a simple answer to this question -- I'm just having trouble
> finding it.
>
> Thanks!
> -john NE4U
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rmcgraw at blomand.net
>