[Elecraft] K3s & Rx antenna

[Don Wilhelm]

Gary,

You can connect it as you have it now, but you can simplify - just 
connect the RX antenna to the AUX RF BNC connector and then enter BSUB 
and select the AUX antenna input for the subRX.

If you also want the RX antenna to feed the main RX when the RX antenna 
is selected, you will have to connect it as you have it for the K3.
Those sections of the K3S work just the same as on the K3.

73,
Don W3FPR

On 2/9/2016 5:16 PM, Gary Smith wrote:
> With the K3s, how should I connect the RX antenna to be most
> effective with the K3s & diversity? As I have it now?
>
>