[Elecraft] K3s & Rx antenna

[Jorge Diez - CX6VM]

I am very happy with KD9SV products, very high quality

http://www.dxengineering.com/parts/svp-sv-rsc

73,
Jorge
CX6VM/CW5W

2016-02-09 19:48 GMT-03:00 Mike K2MK <k2mk at comcast.net>:

> Hi Gary,
>
> I don't know if it's right or wrong to do it the way you described. I chose
> to purchase a 2 port splitter from DX Engineering. Their part number is
> DXE-RSC-2. I suppose there are cheaper alternatives.
>
> http://www.dxengineering.com/parts/dxe-rsc-2
>
> 73,
> Mike K2MK
>
>
> Gary Smith-2 wrote
> > My order is in Queue for a K3s.
> >
> > I currently have a K3 with sub Rx and have a HI-Z Rx antenna I use
> > with the K3. Sometimes I like listening with only the Rx antenna,
> > sometimes I like listening from the the Tx antenna. When I use
> > diversity I want to hear from both the Rx and main antennae.
> >
> > With the K3, what I have done with the Rx coax is attach it to a T
> > connector with one end attached to the BNC connector {27} Aux RF,
> > located below ANT 2 and the other leg connected to the RX ANT - IN on
> > the KXV3.
> >
> > Once I upgrade the two KBPF3 and Sub Rx board, I will migrate the Sub
> > RX to the K3s
> >
> > With the K3s, how should I connect the RX antenna to be most
> > effective with the K3s & diversity? As I have it now?
> >
> > Thanks,
> >
> > Gary
> > KA1J
>
>
>
>
>
> --
> View this message in context:
> http://elecraft.365791.n2.nabble.com/K3s-Rx-antenna-tp7613833p7613837.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to cx6vm.jorge at gmail.com
>



-- 
73,
Jorge
CX6VM/CW5W